1. Device Setup

   1. iOS

   2. Android [TBD]

2. e2e EN Test Steps [2 phones, verification key]

3. Proximity Test (Simulated ENs) [2 phones, no verification key]

4. One Phone Tests [1 phone, no verification key]

   1. On boarding

   2. Exposure History

End to End Exposure Notification Test Steps

[Requires: 2 phones, verification key]

This test will walk you through the main exposure notification (EN) flow, including On-boarding and diagnosis key submission.

Device Setup

iOS [13.5 or later only]

If you don’t already have TestFlight installed on your devices, you’ll need to first install it using the following instructions. If you already have TestFlight installed, skip to the “Join the Beta” step.

Installing TestFlight:

1. Load the TestFlight “join” URL on the device you intend to use for testing: https://testflight.apple.com/join/byXkRxFs [<- Guam specific link]. You should see:

   

2. Click the “View in App Store” button to load the App Store and follow the normal steps to download and install TestFlight.

3. Once TestFlight is installed, return to your browser and click “Start Testing” under “Join the Beta” to launch TestFlight.

Installing the Beta App:

1. Click “Install” to install the beta app (app names will vary by specific location being tested).

   

2. Once the app is installed, click “Open” to launch the app

3. TestFlight will walk you through a short introduction:
   

   

4. Click “Start Testing” to begin testing. You should see a welcome screen:

   

Updating the Beta App:

Future updated app builds will appear in TestFlight and trigger new email reminders and push notifications to download and continue testing: