...
End to End Exposure Notification Test Steps
...
| Info |
|---|
Requires:
|
...
|
This test will walk you through the end to end (e2e) main exposure notification (EN) flow, including on-boarding and diagnosis verification code submission.
...
Complete Device Setup steps for at least two mobile devices [with sim cards & Bluetooth enabled]
Have access to at least 1 valid verification code for a positive diagnosis (this should be provided by a test lead)
Go through the on-boarding flow and ensure exposure notifications and proximity tracing are enabled on each phone
Return to your devices' respective home screens and leave each app running in the background for at least an hour. This is necessary for your phone to start generating keys that will be required later on.
...
After your test phones have had sufficient time to passively download generate an exposure key, move them into proximity (2m/6ft) with each other (if they weren’t already) for at least 15 minutes
On one phone, open the app and select “Report positive test result”
Advance to the next screen and enter the 8 digit verification code (Setup step 2)
Note: verification codes are only valid for 1 hour from the time of their generationSelect the ‘Share’ button on the pop-up that asks you to share your device’s random IDs.
Select the ‘I understand and consent’ button on the subsequent screen.
Select the ‘Done’ button to return to the Home screen.
Check Leave the app running in the background on both phones and periodically check the other non-positive phone for an exposure notification - this process may take up to 24 hours
Tapping the notification will take you into the app, where the circular “exposure” icon (2nd from the left) will take you to the Exposure History which should be populated with any test exposures we prompted
Proximity Test (Simulated ENs)
[Requires: 2+ phones w/sim cards?]
This test is a truncated version of the e2e EN test above meant to test proximity tracing and the showing of simulated Exposure Notifications without a verification code.
Test Setup & Prerequisites
Same as e2e EN test above, except no verification code is required
...
After your test phones have had sufficient time to passively download an exposure key, move them into proximity (2m/6ft) with each other (if they weren’t already) for at least 15 minutes
Select the More menu (three dots icon) and then the EN Debug Menu
Select Simulate Exposure on at least one phone
You should see a popup debug message and receive a push notification of a possible
COVID-19 exposure.
Click OK to dismiss the debug message, and click the notification to return to the app.
Tapping the notification will take you into the app, where the circular “exposure” icon (2nd from the left) will take you to the Exposure History which should be populated with the test exposure
One Phone Tests [TBD]
[Requires: 1 phone w/sim cards?]
...